#FREUD 99 762 PLUS#
#FREUD 99 762 FREE#

Perma-SHIELD coating reduces heat & pitch build-up from rust.TiCo Hi-Density Carbide to maximize bit life and material finish.

Patented Extended Tenon Capability - Top portion of cutter, including bearing and spindle, is removed to produce the front of the long tenon profile.

Unique cutter geometry to eliminate tear-out. Compare Similar Products to Freud 99-762: 1-11/16 (Dia.) Premier Adjustable Rail & Stile Bit - Shaker Specs: Overall Dia.

Adjustable shims adjust panel groove down to 7/32'(5.5mm) and up to 3/8' (9.5mm) thick, ideal for plywood panels.

Add optional cutters to create double sided profiles in thicker stock material.

Unique cutter geometry to eliminate tearout.

Add optional cutter to create glass or screen doors Adjustable shims adjust panel groove down to 7/32(5.5mm) and up to 3/8 (9.5mm) thick, ideal for plywood panels.

This set is for use with the 1/2' Router Shaker Adjustable Rail and Stile System.

Choose from a variety of material thicknesses (5/8' to 1-1/4') Take on high production work with this Cutters for Double Sided Doors (89-862) from Freud.

Adjust groove width for different panel thicknesses Shop for the best Router Bits at Prefential Price Freud 99-762 - 1-11/16 (Dia.) Premier Adjustable Rail & Stile Bit. Optional double sided door cutter for the New Premier Adjustable Rail & Stile Shaker Style router bit system 99-762.

Create extended tenons for extra door joint strength (patented solution).

Our new Rail & Stile system is the FIRST & ONLY solution on the market that allows you to: Freud really should demonstrate this on their video if they want people to be successful using their bit, rather than just hyping their own product.Application: Produces perfect fitting rail and stile doors from 5/8' to 1-1/4' stock Now with Freud´s unique, patented Premier Adjustable Rail and Stile Router Bit system, you are able to build any style of cabinet door in a range of door thicknesses and sizes! This extremely easy-to-use solution gives you unlimited creative freedom, and solves the long-standing challenges and limitations of frame and panel door construction. Instead, cut the bulk of the tenon out with whatever method you favor (hand saw, table saw, etc) and then use the router to cut the final cove pass. Freuds unique Premier Adjustable Rail and Stile System builds perfect doors in material from 5/8 to 1-1/4 thick. It will take far too much time to get your rail setup making multiple passes for every rail to make the extended tenon, and it will wear out the lower cove cutter much faster than the upper cutter. As with any shaper/router table operations, the key is to have complete control of the workpiece, using featherboards, miter gauge, clamps, coping sled, power feeder, etc. Freud 99-862 Optional Cutters for Double Sided Doors 99-762 New Premier Adjustable Rail and Stile System Shaker Style Shank, 1/2-Inch. I mainly got this bit for making extended tenons- the way to make a real door.

#FREUD 99 762 PLUS#

It seems that the ovolo plus fillet is a total of 9/16' deep, leaving a 5/8' dado for a panel on a 1-3/4' door. Great prices on a Freud 99-762 1-11/16 Premier Adjustable Rail & Stile Bit with 1/2 Shank - D1-11/16, A1/2, H3-3/4 and other Freud router accessories with.

#FREUD 99 762 FREE#

Learn More EARN 120 In stock Condition: New Item Number: FRE99-762 Free Shipping 1. Freud should also clearly show the tenon/dado thickness left by the router. 119.95 4 interest-free payments of 29.98 with Klarna.

In my past experience making cabinet doors, a 2-3/4 rail with a 1/2' ovolo yields a 2-1/4' flat that is standard among most typical cabinets. One thing that is confusing is that the ovolo profile is 7/16' wide, not 1/2' wide like the stub tenon, so even though the formular for determining rail widths given on Freuds website are correct for the overall size, you will end up with a flat rail or stile that is slightly wider than you may be aiming for. Adjustable shims adjust panel groove down to 7/32(5.5mm) and up to 3/8 (9.5mm) thick, ideal for plywood panels. I did find that the cove cutter has a pretty violent wobble to it, and its good with any of these types of bits to start out at a low speed and increase it until you find the right rpms, which you can feel and hear. As for the bits themselves, they come in a nice case, but could use some basic information like the profile dimensions and a diagram of the stack setup of bearings, washers, and cutters. Overall its a useful set but dont plan on building a houseful of oak doors for yourself like the instructional video.

Freud 99 762